ELECTRIC ULILITY VEHICLES
All our electric vehicles are constructed with a rugged steel frame chassis made with Australian RHS steel to take the demands of large payloads and tuff industrial applications.
Our utility vehicles are built on leading edge motor technology. This means significantly improved performance in both power and battery efficiency. Therefore, you can carry/pull more pay load for longer.
The vehicle is powered by a 36/48 volt DC motor providing extended vehicle operating life, fitted with 6 heavy duty deep-cycle lead-acid batteries.
Under normal operating conditions, the vehicle will operate at full speed for a duty-cycle of about 7-8 hours. This equates to an available vehicle traveling distance of approximately 70-80 km. This is significantly longer range than many of the other major electric vehicle manufactures.
Our electric vehicle range provides an environmentally friendly solution to your industrial carrying needs. Therefore, these vehicles can be used within under-covered or enclosed areas, such as warehouses, without polluting the atmosphere with toxic fumes.
Click to enlarge
Click to enlarge
Click to enlarge

Click to enlarge

Click to enlarge
Click to enlarge
 Standard features
The vehicles are trimmed with fibreglass body work (not plastic) for strength and durability. All seats, canopies, and drop-sides are made from UV resistant materials for long life. Our utility vehicles all come standard with rack and pinion steering and full suspension for improved drivability and handling in confined spaces.
Our driverís cab, with integrated windscreen, is standard,. Unlike many other suppliers, where these are optioned in and thus increase the overall price.  Also, standard is a fully retractable driverís inertia seat-belt for added safety.
The utility vehicle is only 1.0 metres wide to allow operation within building lifts and some narrow passage ways. All vehicles are speed limited to 8-10 km/hr for driver and pedestrian safety. Also has, low ground clearance for easy step-up for the driver.

Environmentally Friendly
Our electric vehicle range provides an environmentally friendly solution to your transportation requirements. Move your people in a clean, green vehicle. Therefore, these vehicles can be used within under-covered or enclosed areas, such as warehouses, without polluting the atmosphere with toxic fumes.

Fully configurable
The entire vehicle is fully configurable to include different towing and carrying configurations. We can include tipper trailers, enclosed rear cabinets with or without shelving, standard utility trays with or without drop-sides. Basically any configuration is possible to meet your specific needs, so please come and discuss your needs with our sales team. If you don't need some of the standard features listed above, like the driverís cab, then the utility can be manufactured without it to suit your needs.

Fully configurable to suit your needs
The Utility vehicle is fully customisable. Below are some of the common options:
Amber Safety Strobe Beacon, which may be required in many industrial applications as required by your local OH&S regulations.
External Cab Mirrors, which provide added safety in some environments where there is frequent reversing.
Safety Lighting Package, which includes halogen headlights, taillights, brakelights, turn indicators, and horn.
Passenger Seat Belts, which includes sash belts for each additional passenger.
Hour Meter, which provides the driver with a readout of the operating hours of the vehicle. Only available on the electric vehicles.
Battery Capacity Meter, which provides the driver with a readout of the batteries voltage. Only available on the electric vehicles.
Additional Roof Mounted Headlights, which provided additional lighting if the vehicle operates in darkness and more lighting is required.
Integrated Roll-cage, which provides added driver safety.
Storm Covers, which provides clear see-through UV protected drop-sides for protection from the weather for the driver and/or passengers.
Fully Enclosed Cab, hinged doors can be added to the vehicleís cab.
Galvanised Frame.
Selection of Towbar Assemblies; different towbar assemblies are available such as the standard ball, pintle hitch, and ring couplings.
Selection of Rear Tray Assemblies; different rear assemblies are available from enclosed weatherproof cabinets to open utility trays with or without drop-sides.
Trailers, different trailer configurations are available.
Tray Coverings, supplied standard is aluminum checker-plate, but other coverings are available upon request, such as rubber matting etc.

Large Selection of Colours
Below is only a sample of the colours available: