Engine	Powered by 2000cc water-cooled engine, or similar, converted to either LPG gas (LPG conversion certified to Australian and International Standards), Natural gas or petrol.
Transmission	Automatic gearbox with park locking and neutral safety switch. The drive train is through a 4:1 reduction box driving through a universal shaft fitted with CV joints to a rear-differential final drive unit of 4.1:1 reduction.
Brakes	Hydraulic brakes on front wheels (all four wheels optional) with mechanical hand/park brake.
Tyres	Tyre size is 20.5/800-10 6P on front and rear wheels.
Chassis	The main frame is steel RHS with aluminum and fiberglass bodywork. The seating in the prime-mover carriage is fiberglass bench type with access doors on the LH side, RH side or both sides. The doors are fitted with drop-down windows. The floor is aluminum checker plate or rubber covered plywood.
Fuel Tank	A replaceable 25 kg LPG gas cylinder for LPG operation, a fixed refillable Natural gas cylinder for Natural gas operation, or a 35 litre petrol tank for petrol operation is fitted which allows approximately 12 hours of operation under full load.
Instruments	Speedometer, odometer, fuel and temperature gauges and ignition charge lights are fitted.
Safety equipment	Two 200mm x 100mm rear view mirrors, audible and visual warning devices and hazard lighting. Options also include an audible speed, warning device, which turns the engine off if the speed is not reduced within a time frame of 2 seconds.
Maximum Load	The prime-mover carriage seats 9 people plus luggage space.
Paint and detailing	All paint is automotive 2-pack paint, with artwork and detailing as required.
Dimensions	1400mm wide, 4600mm long.
Weight	approx 1100KG